If you have ever 3D printed anything, you know you have to finish up the 3D printed object by removing the supports, the surface is not always perfect and even cracks can occur.
Well, with 3Dsimo Mini, you can finalize your 3Dprinted objects with ease.

As you can see in the photos, the first tool I usually use is wire cutting attachment to remove the base from my model, as well as supports that I can reach from the outside.

Next, I used the burning attachment with a round tip, set to a temperature at which ABS filament the model is made out of melts, to cut off leftovers of the supports, and also to round out the holes.

Next, I corrected tiny cracks on the model using 3D drawing attachment and the same filament.